| Case Type : |
Computer in a keyboard |
| Processor : |
68000@7.14Mhz |
| MMU : |
None |
| FPU : |
None |
| Chipset : |
ECS |
| Kickstarts : |
V2.05 |
| Expansion Slots : |
1 x 40pin Trapdoor Slot
1 x PCMCIA Slot (Type II) |
| Standard CHIP RAM : |
1MB |
| RAM sockets : |
None |
| Hard Drive Controllers : |
1 x 2.5" IDE Controller (unbuffered) |
| Drive Bays : |
1 x Custom Internal Floppy Drive Bay
1 x 2.5" Hard Drive Cradle |
| Expansion Ports : |
1 x 25pin Serial
1 x 25pin Parallel
1 x 23pin RGB Video
1 x 23pin External Floppy
2 x 9pin Joystick/Mouse
2 x RCA Audio (Left/Right)
1 x RF Connector |
| Floppy Drive : |
1 x Internal 880K Drive |
| Motherboard Revisions : |
Rev 1.0 (Extra chip below gayle (CBM 391287-01) and is labelled A300)
Rev 1.1
Rev 1.3
Rev 1.5
Rev 2B
Rev 2D (1/4" shorter than Rev 1.0) |
| Battery Backed Up Clock : |
No |
The AMIGA 600 is an odd Amiga which is somewhere between an A500+ and an A1200, but never gained the popularity of either. The AMIGA 600 looks like a shortened version of the AMIGA 1200, because it does not have a keypad like almost every other Amiga. Very early versions of Kickstart 2.05, such as V37.299 are actually missing scsi.device from ROM, so despite having an IDE controller on the motherboard you cannot actually use it unless you upgrade the Kickstart chip. At least Kickstart 2.05 (V37.350) is recommended if you wish to use hard drives in an AMIGA 600.
You may have noticed the 'PCI' branding in some of the photos, 'PCI Componentes da Amazonia S/A' was an authorised distributor in Brazil of Commodore Electronics USA. For additional information please see
Source :
http://www.amiga-hardware.com/ |
Site pour télécharger
tous les jeux AMIGA
abandonware 
Spécifications
Standard 
