| Standard Case Type : |
Computer in a keyboard |
| Processor : |
EC020@14Mhz (on motherboard) |
| MMU : |
None |
| FPU : |
None
(Some are rumoured to have been shipped in the US with 68882's but this is unlikely) |
| Battery Backed-Up Clock : |
No |
| Chipset : |
AGA |
| Standard CHIP RAM : |
2MB |
| Motherboard RAM Sockets : |
None |
| Floppy Drive : |
Double Density (880K) Drive |
| Motherboard Hard Drive Controllers : |
Unbuffered 2.5" IDE Interface (can be converted for use with 3.5" devices) |
| External Connectors : |
Video (RGB)
Mouse
Joystick
Serial
Parallel
Audio Left
Audio Right
RF Connector for TV
Composite
External Floppy |
| Expansion Slots : |
1 x PCMCIA Type-II Card Slot
1 x Trapdoor expansion slot |
| Drivebays : |
1 x AMIGA 1200 Floppy Drive Bay
1 x 2.5" Hard Drive Cradle |
| Kickstarts : |
KS 3.0 (two 40pin chips) |
| Bus Controller : |
Budgie Rev 01
Budgie Rev 02 |
| Motherboard Revisions : |
Rev 0 (Engineering Prototype)
Rev 1 (Advanced engineering prototype)
Rev 1A (Initial Release)
Rev 1B
Rev 1D.1
Rev 1D.3 (Budgie Rev -01 Release, E123C and E125C have been removed from motherboard)
Rev 1D.4 (Budgie Rev -02 Release, additionally XR358 470Ohm resistor removed, 470Ohm resistor added to pin 43 of Alice)
Rev 2B (Both budgie Rev -01 and Rev-02 were used. Resistor 118 was changed from 470Ohm to 220Ohm) |
Site pour télécharger
tous les jeux AMIGA
abandonware 
Spécifications
Standard 
